Build your own T-Beam Supreme Blackout Comms mesh link with this complete kit. It includes everything you need to assemble and add it as a link to your existing Blackout Comms Cluster. It's easy to assemble, and includes all components, bolts, upgraded antenna, and even a flashing/charging cable.
On top of that, you get a Blackout Comms license that an be applied to any single T-Deck/Pager or other Blackout Comms device, so you can start a new cluster if you already don't have one.
On 10/4/2026, I will be live-streaming a build demo of this kit. You can follow along, ask questions, etc. If you can't join the live-stream (or if you fall behind during the live build), no problem - you can always replay it later. You'll receive a link as the date gets closer, or follow me on X for updates. We will also be building the DIY Custom T-Deck kit at that time.
Note: To have your own mesh cluster, you'll need more than 1 device, at least one of them being a communicator. The additional devices can be more of these, Pager's, T-Deck Plus, or anything else compatible with Blackout Comms. A private Blackout Comms mesh network can have up to 90 devices.
Once assembled & flashed, this communicator will be a great addition to your cluster. It will be fully compatible with the Blackout Comms Live companion app, map downloads, and everything else Blackout Comms offers. The included "Standard" license covers up to 10 devices, including ones you purchase later on, no matter where you purchase them from (Lilygo, Heltec, Amazon, etc).
With this DIY option, you will receive all components, a Blackout Comms license, ready for you to assemble. No special tools or soldering are required. Basically, just plug the components together, put them in the enclosure, flash it, and it's ready to run with your cluster.
Your kit includes:
A Blackout Comms Standard License ($89 value)
A T-Beam Supreme dev board
Custom enclosure, designed by me
Choose between Black/Green, Black/Pink, Black/Tan, or Black/Black
Upgraded antenna (rubber ducky)
18650 battery for ~24 hour battery life between charges
16 GB SD card
All screws/bolts
Programming/charging cable